1. Home
  2. Vol 5, No 3 (2026)
  3. Mohssen

Graphite Nanosheets Modified with Carboxymethyl Cellulose as Eco-Friendly Corrosion Inhibitor for Low-Carbon Steel in Saline Environments to Support Sustainable Development Goals (SDGs): An Experimental and Bibliometric Study

Mohamed R. Mohssen(1), Sinan S. Hamdi(2), Rana A. Anaee(3), Hussain H. Al-Kayiem(4),


(1) University of Technology-Iraq
(2) University of Technology-Iraq
(3) University of Technology-Iraq
(4) University of Hilla
Corresponding Author

Abstract


Eco-friendly polymeric nanofluids were developed by modifying graphite nanosheets with carboxymethyl cellulose (CMC) to inhibit low-carbon steel corrosion in saline environments. This experimental and bibliometric study combined nanofluid preparation, dispersion assessment, electrochemical testing, surface characterization, and literature mapping to connect material performance with SDGs. The nanocomposite formed a stable dispersion, reduced corrosion activity, and produced an adsorbed protective layer. This protection occurred because CMC provided oxygen-rich functional groups for adsorption, while graphite nanosheets strengthened the chloride barrier. The findings support safer corrosion-control strategies that may reduce toxic inhibitor dependence and improve the durability of steel infrastructure in marine and industrial environments.

Keywords


Bibliometric analysis; Carboxymethyl cellulose; Corrosion inhibition; Graphite nanosheets; Low-carbon steel; Sustainable development goals

References


Akhlaq, M., Mushtaq, U., Naz, S., and Uroos, M. (2023). Carboxymethyl cellulose-based materials as an alternative source for sustainable electrochemical devices: A review. RSC Advances, 13(9), 5723–5743.

Anaee, R. A. M. (2014). Thermodynamic and kinetic study for corrosion of Al-Si-Cu/Y₂O₃ composites. Asian Journal of Chemistry, 26(14), 4469–4474.

Borode, A. O., Ahmed, N. A., and Olubambi, P. A. (2021). Electrochemical corrosion behavior of copper in graphene-based thermal fluid with different surfactants. Heliyon, 7(1), e05949.

Fares, M. M., Maayta, A. K., and Al-shawabkeh, A. F. (2010). Carboxymethyl cellulose as corrosion inhibitor of iron in the presence of magnetic field; kinetic investigation. Journal of Corrosion Science and Engineering, 13(27), 1–15.

Fathima, A. A., Geethanjali, R., and Subhashini, S. (2015). Polymeric corrosion inhibitors for iron and its alloys: A review. Chemical Engineering Communications, 202(2), 232–244.

Ghanem, A. F., and Abdel Rehim, M. H. (2018). Assisted tip sonication approach for graphene synthesis in aqueous dispersion. Biomedicines, 6(2), 63.

Kumar, B., and Priyadarshi, R. (2020). Nanoporous sodium carboxymethyl cellulose-g-poly(sodium acrylate)/FeCl₃ hydrogel beads: Synthesis and characterization. Gels, 6(4), 49.

Najm, N., Ataiwi, A. H., and Anaee, R. A. (2022a). Effect of indium coating on corrosion behavior of AZ31 Mg alloy by DC sputtering. Materials Today: Proceedings, 62, 4551–4555.

Najm, N., Ataiwi, A. H., and Anaee, R. A. (2022b). Annealing and coating influence on the mechanical properties, microstructure, and corrosion properties of biodegradable Mg alloy (AZ91). Journal of Bio- and Tribo-Corrosion, 8(2), 64.

Ren, H., Gao, Z., Wu, D., Jiang, J., Sun, Y., and Luo, C. (2016). Efficient Pb(II) removal using sodium alginate–carboxymethyl cellulose gel beads: Preparation, characterization, and adsorption mechanism. Carbohydrate Polymers, 137, 402–409.

Salama, A., Shukry, N., and El-Sakhawy, M. (2015). Carboxymethyl cellulose-g-poly(2-(dimethylamino)ethyl methacrylate) hydrogel as adsorbent for dye removal. International Journal of Biological Macromolecules, 73, 72–75.

Senthilvasan, P. A., and Rangarajan, M. (2016). Corrosion inhibition properties of graphene oxide on mild steel in 3.5% NaCl. IOP Conference Series: Materials Science and Engineering, 149, 012064.

Shao, H., Li, D., Chen, Z., Yin, X., Chen, Y., Liu, Y., and Yang, W. (2024). Sulfur dots corrosion inhibitors with superior antibacterial and fluorescent properties. Journal of Colloid and Interface Science, 654, 878–894.

Sharma, V., Garg, A., and Sood, S. C. (2015). Graphene synthesis via exfoliation of graphite by ultrasonication. International Journal of Engineering Trends and Technology, 26(1).

Solomon, M. M., Umoren, S. A., Udosoro, I. I., and Udoh, A. P. (2010). Inhibitive and adsorption behaviour of carboxymethyl cellulose on mild steel corrosion in sulphuric acid solution. Corrosion Science, 52(4), 1317–1325.

Tiu, B. D. B., and Advincula, R. C. (2015). Polymeric corrosion inhibitors for the oil and gas industry: Design principles and mechanism. Reactive and Functional Polymers, 95, 25–45.

Umoren, S. A., and Eduok, U. M. (2016). Application of carbohydrate polymers as corrosion inhibitors for metal substrates in different media: A review. Carbohydrate Polymers, 140, 314–341.

Verma, C., Ebenso, E. E., Quraishi, M. A., and Hussain, C. M. (2021). Recent developments in sustainable corrosion inhibitors: Design, performance and industrial scale applications. Materials Advances, 2(12), 3806-3850.

Verma, C., Verma, D. K., Ebenso, E. E., and Qurasishi, M. A. (2018). Sulfur and phosphorus heteroatom-containing compounds as corrosion inhibitors: An overview. Heteroatom Chemistry, 29(4), e21437.

Xu, H., and Suslick, K. S. (2011). Sonochemical preparation of functionalized graphenes. Journal of the American Chemical Society, 133(24), 9148–9151.

Yu, W., and Xie, H. (2012). A review on nanofluids: Preparation, stability mechanisms, and applications. Journal of Nanomaterials, 2012(1), 435873.


Full Text: PDF

Article Metrics

Abstract View : 0 times
PDF Download : 0 times

Refbacks

  • There are currently no refbacks.


Copyright (c) 2026 Bumi Publikasi Nusantara

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.